Indoor air quality, people safety, acoustic comfort and energy savings are criteria and performance of this program certified 400°C-1/2H, covered by a CSTB Technical Advice (HYGRO A, B and GAZ). Communicating and ergonomic for an easy installation and use.
You are looking after an information ?
Post your request or ask your question
CALADAIR is at your service
ECOVOR™, EXHAUST FAN UNIT F400-60 very low consumption constant pressure
ECOVOR™, 400°C - 1/2h exhaust fan unit
ErP2018, very low consumption for housing ventilation.
Motor fan : High efficiency forward wheel
EC Moteur with 2 pre-programmed regulation modes : LOBBY™ for constant pressure or BLUETECH™ for rising curve (choice on site).
MODBUS RS485 communication
Flow rate from 200 to 5 000 m3/h
Equipped with circular branch connections with double lip seals to ensure the network sealing (ATEC CSTB n° 13-224-V2), a local padlockable switch, a control panel with IP54 LCD display communicating in MODBUS, a pressure default relay.
Bird protection grid on discharge
Backward wheel, epoxy-treated
Two pre-programmed regulation modes : either the LOBBY™ mode, self regulation in constant pressure, either the BLUETECH™ mode, maximum optimisation of consumption according to the actual requirements of the building, also guarantees very low noise levels, in accordance with the RT2012 requirements.
Can be installed internally or externally. Its cubic shape is adapted to all intake/discharge combinations, at 90°.
It is covered by a CSTB technical notification for Hygro A, Hygro B and Hygro Gas usage (article of october 1983)
Meets requirements of the EP2009/125/EC directive
CSTB technical notification for Hygro A,
Hygro B and Hygro Gas usage
Very low consumption econological™ solution, compliant with RT2012
PLUG&PLAY, the ECOVOR™ range is designed, manufactured and tested at our factory
EASY TO INSTALL
Its cubic shape adapts to all intake/discharge combinations, at 90°
EASY TO USE AND MAINTAIN
The control panel with LCD display instantaneously shows setpoint data for the
operating mode selected.
Easy access to all internal parts.