THERMOVER™, eru thermodynamic


THERMOVER,  high performance double flow air handling unit with active energy recovery and thermodynamics reversible system
Equipped with a EUROVENT certified AARE rotary exchanger
Plug fan EC motor very low consumption
CLEARDUST™ / Double Stage supply air filtration device for High Indoor Air Quality
Module CLEARMOTION™ DU, an innovative and patented solution to decontaminate, depollute and disinfect air and surfaces and guarantee a Very High Indoor Air Quality.
MODBUS communication
High performance air handling unit with active energy recovery and integrated heat pump thermodynamic system for optimal climate control in all seasons as well as for indoor air quality.
Designed for air treatment in commercial and industrial buildings, this self-regulating multi-functional unit is PLUG & PLAY - SET&FORGET and meets directive ErP2018requirements, energy savings criteria and building active efficiency principles (EN15232).
For a complete use package and an easy installation, the THERMOVER™ unit can also provide hot sanitary water (MUST and GENIUS versions).
Flow rate from 600 to 5 000 m3/h

THERMOVER,  high performance double flow air handling unit with active energy recovery and thermodynamics reversible system for office and industrial buildings.
Its direct current EC motor meets the ErP/2009/125/EC directive.
The EASY control system, with an integrated digital display, communicates in MODBUS RS485.
The THERMOVER unit can operate in a constant pressure or constant flow mode. The choice of the modulation is done on site, while starting up the unit.
Associated with our WONDEROOM zone controller, the LOBBY constant pressure air flow modulation ensures the multi-zone implementation in the building, which is insured to be energy performant.
The  FEE function enables an optimum management of temperature at any season, in an autonomous and automatic way with the EASY control system. Accordingly, the FEE function ensures energy savings above 40%.
The MUST and GENIUS versions of the THERMOVER unit are designed to ensure production of hot water for sanitary use. As an option, a high performance hot water buffer tank (200, 300 or 500l) can be offered.
This very low consumption econological solution meets requirements of the ErP2009/125/EC directive, RT2012 energy savings criteria and principals of buildiing active efficiency (EN 15232).
Variable speed rotary heat exchanger is EUROVENT certified.
Tests are validated by CETIAT, according to EN13141-7 et EN14511

Model Static Pressure Curves Public price
THERMOVER 180S FIRST
Code : CDT021752
Connectez vous pour accéder aux tarifs
THERMOVER 280S FIRST
Code : CDT021753
Connectez vous pour accéder aux tarifs
THERMOVER 400S FIRST
Code : CDT021754
Connectez vous pour accéder aux tarifs
THERMOVER 500S FIRST
Code : CDT021755
Connectez vous pour accéder aux tarifs
THERMOVER 180S PREMIUM BE
Code : CDT021756
Connectez vous pour accéder aux tarifs
THERMOVER 280S PREMIUM BE
Code : CDT021757
Connectez vous pour accéder aux tarifs
THERMOVER 400S PREMIUM BE
Code : CDT021758
Connectez vous pour accéder aux tarifs
THERMOVER 500S PREMIUM BE
Code : CDT021759
Connectez vous pour accéder aux tarifs

Very low consumption econological solution meets the  ErP2009/125/EC directive requirements, RT2012 energy savings criteria and active efficiency building principals  (EN 15232)
Rotary exchanger with variable speed, EUROVENT certified
Tests validated by CETIAT, according to EN13141-7 and EN14511 

PLUG&PLAY, each THERMOVER unit is designed, manufactured, tested and preloaded at our factory

EASY TO INSTALL
To be easier to handle, the THERMOVER unit is deliverd in 3 modules.
The THERMOVER unit has access doors on slides with nuts, a technical compartment with lateral fixed panel integrating the local padlockable switch, the IP54 LCD control display and the power cable gland.
F7 filters are on slides and tight shut-off dampers are with aluminium blades sliding in opposite directions
An indoor or outdoor installation is possible with a prelacqued RAL 7035 metal sheet rooftop.
A standard,  the THERMOVER unit is delivered for an installation with layered in line air flows.
The THERMOVER unit can operate in a constant pressure or constant flow mode. The choice of the modulation is done on site, while starting up the unit.

EASY TO USE AND TO MAINTAIN
Access to the internal elements is done by the front panel, looking at on the right of the supply air flow, except for batteries which are accessible by the rear panel

By continuing your navigation, you accept the deposit of third-party cookies to improve your user experience.

I agree No, learn more